Synergy3 Copper
Synergy3 Copper
Expand Video Gallery List
Expand Video Gallery List
- Black w/ Raw (Right)
- Black w/ Bronze (Right)
- Black w/ Blue (Left)
- Blue w/ Raw (Right)
- Blue w/ Bronze (Right)
- Clear Anodize w/ Bronze (Left)
- Green w/ Blue (Right)
- Green w/ Bronze (Right)
- Grey w/ Raw (Right)
- Grey w/ Bronze (Right)
- OD w/ Bronze (Left)
- Orange w/ Raw (Right)
- Orange w/ Bronze (Right)
- Red w/ Raw (Right)
- Red w/ Bronze (Right)
- Red w/ Blue (Right)
- Violet w/ Raw (Right)
- Machined from C14500 Tellurium Copper billet
- High luster machined finish, no coatings, will develop a natural patina
- Fully captured design with copper hinges, latch, and titanium screws
- Adjustable tension, ambidextrous titanium pocket clip
-
4 High CRI LED Options
- Gold plated beryllium copper springs
- Frelux™ FPV2 multi-chemistry multi-voltage constant current driver
- Compatible with AAA (NiMH recommended)
- Compatible with Button Top 10440 3.7v Li-Ion (Maximum Output)
- Frelux™ ramping user interface with memory
- Physical Reverse Polarity Protection
- Low Voltage Protection (Both cell types, temporary override capable)
- Over Temperature Protection (temporary override capable)
- Physical button lockout
- Waterproof (tested to 8ft deep)
The Synergy3 is the latest Frelux designed light. It features a fully captured design, so everything stays attached to the light when changing the batteries. The unique hinge mechanism offers a satisfying pop and click when opening and closing. Tightening the retention nut seals up the light and locks the tension of the adjustable pocket clip. Each light has 22 precision machined components made from aluminum, brass and titanium.
Please choose a default side for the pocket clip. Right handed people usually carry the light in their right pocket so the clip is installed on the right side of the light (if holding the light). This is user swappable but you will need a T8 Torx and a .035" (.9mm) Hex.
Specs:
Please note outputs and runtimes are estimated and may vary depending on the battery type and condition.
Eneloop Pro AAA
Moonlight: 220 hrs
Default: 14 hrs
Max / Turbo: 72 minutes
Max Output: 350 Lumens
PKCell Li-Ion
Moonlight: 70 hrs
Default: 4.5 hrs
Max: 20 minutes to step down 42 minutes to off
Turbo: 10 minutes to step down 58 minutes to off
Max Output: 600 Lumens
Batteries Confirmed Working
4x PKCell 10440 3.7v Li-Ion
2x PKCell 10440 3.7v Li-Ion w/Charger
4x Panasonic Eneloop Pro AAA High Capacity Ni-MH
4x EBL High Capacity Ni-MH
EBL Universal Charger